Makita 192077 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle for 6701D, 6720D, 6176D, 6791D and 6891D Drills

Makita 192077 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle for 6701D, 6720D, 6176D, 6791D and 6891D Drills Features

Additional Makita 192077 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle for 6701D, 6720D, 6176D, 6791D and 6891D Drills Information

What Customers Say About Makita 192077 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle for 6701D, 6720D, 6176D, 6791D and 6891D Drills:

This Chuck is a REAL SLAM on Makita. The same story as the rest, Had I read their comments, I wouldn't be as they are now. They need to revamp this TOTALLY.

Makita is overrated garbage. Stick with quality. at the store they said the spring probably broke. then I tried to reinsert, but after opening it up it got stuck on open and would not close any more. plain and simple. This product sucks. I used it once and the drill bit turned loose after 10 seconds. This is after one usage.

I was unable to remove the drill bit since the chuck had frozen in the locked position. The drill went into impact mode when it encoutered hard wood and locked the drill bit into the chuck. I would only recommend using this tool for small hole drilling in which case buying a set of drills with the hex shank is cheaper than buying the chuck adapter. Great idea but has limitations. I used it once to drill a 3/8 inch hole in wood. I wound up destroying the chuck to retrieve my drill bit.

It works great and is a much better keyless chuck than the ones Dewalt puts on their drills, for instance. (Tool belt space is valuable). This chuck allows you to use regular drill bits in impact drivers with 1/4" hex drives. It could be a little smaller for the actual capacity it has.